to-39 LED 225nm 235nm 254nm 265nm 270nm 295nm 308nm DIP Lamp
Specifications:
1. Shapes: dip led
2. Emitting color: 225-235nm/250-260NM / 260-270NM / 270-280NM / 280-290NM / 290-300NM / 300-315NM
3. DC forward voltage (VF): 225-235nm 6-8.5V, 250-315NM 5-7V
4. Lens : Quartz lens
5. Life Span: 10,000 Hours
6. With RoHS & CE Approved
7. Beam angle: 7 degree
8.Forward Current: 20-100ma
9.size:30 degree:Φ9.14*8.61mm (Φ × D × H) [Unit: mm]
(UVC 225-315NM)Applications :
1.Air and water purification;
2. UV detection and communication technology;
3.Food processing and preservation, food and beverage packaging, fresh storage, etc.;
4. medical care, dermatological treatment, etc;
Dip led (225-315NW )
Dimension |
Φ9.14*8.61mm (Φ × D × H) [Unit: mm] |
Power Consumption |
0.5W |
Peak Wavelength |
225-315NM |
Radiant Flux |
225-235NM:1-2MW ; 250-315NM 10-18MW |
Spectrum Half Width |
10NW |
Forward Current |
20-100mA |
Application |
Air and water purification, Medical Equipment |
Ultraviolet detection
Peak Wavelength Tolerance ± 5nm
Forward Voltage Tolerance ± 10%
RJ-b is thermal resistance from junction to case.
All characteristics are measured by RZXLED
Installation: This process is mainly to protect the static electricity
Check if the grounding wire of the machine equipment is normal before production;
Check if the static ring is normal, check static metal and human skin contact closely;
Check if the workerswear anti-static gloves;
Check if the working table is paved with electrostatic rubber cloth, and the rubber cloth is connected to each other.
After opening the seal, it is better to use it out in 24hors, otherwise it may cause the oxidation of the foot.
It is recommended to use low temperature solder paste for reflow, and the temperature curve is shown in the following diagram.
With the increase of current and temperature, the life of LED will decrease, which leads to the acceleration of the attenuation of LED.
It is recommended to wear protective clothing,gloves and glasses during operation.